10 Rockville Speaker Stands Review 2022 – Buyer’s Guide

Rockville Speaker Stands Review 2022 – Have you recently purchased new speakers but lack solid speaker stands on which to mount them? Imagine not being able to properly mount the most beautiful-looking and best-sounding speakers. The best speaker should now enter the scene!


Rockville-Speaker-Stands

Rockville Speaker Stands Review 2022


#01 – Universal Speaker Stands with Cable Management,

Universal Speaker Stands with Cable Management, Stands for Satellite Speakers & Bookshelf Speakers Holds to 22lbs, 33.6 Inch Surround Sound Speaker Stands 1 Pair (PGSS2)
  • Universally Compatible - These speaker stands are designed for satellite speakers & bookshelf speakers up to 22lbs such as Klipsch, Sony, Edifier, Yamaha, Polk, Vizio, Samsung and other computer speakers. These speaker stands are easy to use and can meet your requirements.
  • Wire Management - The pole of this bookshelf speaker stand is hollow and has built-in 1.18”×0.78” wire holes so you can route your cables through the wire holes into this speaker stands for a cleaner look. The hidden cables can make your home look more neat and organized.
  • Attractive Design - We provide the universal bracket and sponge for your speakers, which can help prevent the speakers from shaking and give you a better sound. These surround sound speaker stands have a strong tempered glass base with non-slip feet, which can protect your floor from being scratched or damaged.
  • Suitable Height - The height of these speaker stands is 33.6 inches. When sitting on the sofa, the speakers can be set at the perfect height, which can help improve sound and help you enjoy the best acoustic environment. You’ll love using our speaker stands.
  • Tool Free & Easy Assembly - You can install your speakers without using other tools when assembling these bookshelf speaker stands. First, adjust the size of the speaker brackets ( 5.9 "-10" ) to install the speakers, then you just need to tighten the screws. After that, you’re done!

#02 – VideoSecu 2 Heavy Duty PA DJ Club Adjustable Height Satellite Speaker Stand Mount

VideoSecu 2 Heavy Duty PA DJ Club Adjustable Height Satellite Speaker Stand Mount - Extends 26.5" to 47" (i.e. Bose, Harmon Kardon, JBL, KEF, Klipsch, Sony, Yamaha, Pioneer and Others) 1B7
  • Height adjustable from 26.5 inch to 47 inch (673mm - 1193mm)
  • Side clamping top plate can adjust width from 5.5 to 11 inches (140mm-279mm). For width adjustment, #3 Phillips bit is recommended.
  • The top plate can pan 180 degrees and tilt +/-10 degrees for level adjustment
  • Adjustable screw-in rubber feet keep unit level on carpet or hard floor; Concealed wire management, Stability ensured

#03 – Speaker and Microphone Stand Gig Bag by Hola! Music,

Speaker and Microphone Stand Gig Bag by Hola! Music, Dual Compartment, 50 Inch Long with Shoulder Strap
  • Speaker and Microphone Stand Gig Bag by Hola! Music, Dual Compartment, 50 Inch Long with Shoulder Strap

#04 – PERLESMITH Universal Floor Speaker Stands 28 Inch for Surround Sound,

PERLESMITH Universal Floor Speaker Stands 28 Inch for Surround Sound, Klipsch, Sony, Edifier, Yamaha, Polk & Other Bookshelf Speakers Weight up to 22lbs - 1 Pair
  • CABLE MANAGEMENT: The 28-inch post assembly features large holes for running cables through the tube to keep wires neat and organized
  • WIDE COMPATIBILITY: Universal surround sound speaker stand system for most satellite and bookshelf speakers including Klipsch, Sony, Bose, Vizio, Samsung, Yamaha, Edifier, Polk and more. Square glass top plate is 7.79” and features rubber pads. Supports up to 22lbs
  • TOOL-FREE ASSEMBLY: Speakers can be placed directly on the stand. Instructions for the easy 4-step assembly process are included
  • HEAVY-DUTY DESIGN: Premium metal speaker stands are strong and sturdy with 11.8” glass base. Metal and rubber feet are included as options to help protect carpet or tile flooring and to provide more stability
  • 45° ADJUSTABLE TOP PLATE: The glass top plate is adjustable by 45 degrees to fine tune speaker direction for better positioning. Rubber isolation pads are included to further dampen vibrations and unwanted resonances

#05 – Sonos Speaker Stand Pair of Sound – Play 1 and 3 Holder,

Sale
Sonos Speaker Stand Pair of Sound - Play 1 and 3 Holder, Telescoping Height Adjustable from 26” - 52” Inch, High Heavy Duty Three-point Triangle Base w/ Floor Spikes and 9” Square Platform - Pyle
  • SONOS SPEAKER COMPATIBLE: Pyle designed a pair of speaker stand according to the shape, aesthetics and black coat finish color of the Sonos speaker play 1. It works with both the SONOS PLAY 1 and PLAY 3 speakers in any orientation
  • HEIGHT ADJUSTMENT: It features a telescoping center column that is adjustable ranging from 26''- 52'' inch high and secure it with a sturdy pin. The rugged and durable metal construction assures structural stability
  • SQUARE PLATFORM: The SONOS speakers can be easily place at the 9'' inches square platform with 2mm thick and non-slip pad. It has 90 lbs weight capacity for each speaker stand. Perfect for any home theater space
  • THREE-POINT TRIANGLE BASE: It has equal 18''x 18'' x 18'' base plate to support solidity and safety of the Sonos speaker. It also has floor spikes with an equal heavy weight distribution makes the base extremely stable and secure
  • EASY TO ASSEMBLE: Pyle made sure that these Sonos speaker stands comes with necessary hardware for a hassle free assembly and mounting. More importantly, the company included an assembling manual for clear and precise preferences to use the stands

#06 – Rockville RPG122K Dual 12″ Powered Speakers,

Rockville RPG122K Dual 12" Powered Speakers, Bluetooth+Mic+Speaker Stands+Cables
  • What's Included: (2) 12" DJ/PA Speakers (1 active, and 1 passive that gets powered through the active via included 1/4" cable). (2) Rugged Tripod Speaker Stands. (1) Wired Microphone. (1) Mic Clip. (1) XLR to XLR Cable for the Microphone. (1) 19 Ft. 1/4" Cable for Active to Passive Speaker Connection. (1) Power Cable for Active Speaker. (1) Wireless Remote Control. Owner's Manual. Warranty Card
  • Rockville Power GIG RPG122K (2) 12" DJ/PA Speakers with Stands, Microphone, and Cables . 1000 Watts Peak / 250 Watts RMS / 500 Watts Program Power. High Power 12" Long-throw Woofer with 2" aluminum voice coil for clear sound reproduction and awesome bass response. 25mm Piezo Compression Horn Tweeter For Clear Highs. Bluetooth Built In. TWS linking of 2 systems together wirelessly through Bluetooth.
  • USB input for MP3 playback from thumb drive (for iPhone/iPod audio use AUX/RCA inputs).. SD digital MP3 music player. Wired Microphone Included (high quality metal mic). 2 Rugged Tripod Speaker Stands Included. FM Radio Built-In- tune to your favorite FM radio stations. LCD screen- displays MP3 functions and easy BT connectivity pairing. Wireless remote control- Enjoy the added convenience of being able to adjust any of the MP3 player functions, including volume, from the included wireless remote..
  • Ergonomically shaped side handle for easy carrying and setup. Included 1/4" Cable for Active Speaker to Passive Speaker Connection. Built In Bass and Treble Master Equalizer Controls. MP3 modules has additional preset EQ curves (Pop, Rock, Jazz, Classic, Country, Normal). Mixer Channels 1 and 2: 2 XLR + 1/4" Selectable Mic/Line Level Inputs. Mixer stereo channel with RCA or XLR input, or selectable MP3 module.
  • XLR line output to connect a powered subwoofer or another speaker system. Master Volume/ Master Treble/ Master Bass Knobs. Amplifier clip limit LED indicator & power LED cabinet at rear. Frequency Response: 60Hz - 20kHz. Maximum SPL @ 1w/1m: 116dB. High-quality components and exceptionally rugged high impact ABS construction. Sensitivity: 94 dB +/-2 dB. Impedance: 8 Ohm. 115/230 Volt Switchable for use in countries around the world!. Speaker Dimensions: 12.25" x 15.5" x 22.5” (L x W x H)

#07 – Rockville Pair RVES1 Adjustable Tripod DJ PA Speaker Stands +Carry Bag

Rockville Pair RVES1 Adjustable Tripod DJ PA Speaker Stands +Carry Bag/Universal
  • Includes: (2) Tripod Speaker Stands. (1) Carry bag for the stands.
  • Pair Rockville RVES1 Adjustable Tripod DJ PA Speaker Stands With Carry Bag.
  • Adjustable Height. Steel Construction with Nylon Clutch and Base. Black Color.
  • Weight Capacity: 100 lbs. Adjustable Height Range: 71 inches.
  • Base spread: 0-32 inches. Tube Diameter: 1.38 inches. Leg Diameter: 1.38 inches.

#08 – PERLESMITH Universal Speaker Stands Height Adjustable Extend 18” to 43” Holds Satellite Speakers

Sale
PERLESMITH Universal Speaker Stands Height Adjustable Extend 18” to 43” Holds Satellite Speakers & Bookshelf Speakers up to 11lbs-1 Pair PSSS2 Black
  • 【ACHIEVE THE BEST SOUND】 Height adjustable speaker stands from 18.7” to 43” can help you get the best sound out of your speakers by creating a listening "sweet spot" when you are seated. Placing your bookshelf speakers on the appropriate height speaker stands can also reduce reflections to give you a purer and more clear sound. Allows tilting your speaker 0-5° in all directions, directing the sounds towards you for optimal listening experience.
  • 【UNIVERSAL STAND ADAPTS TO YOUR SPEAKERS】 The floor speaker stands can fit a variety of different types of small satellite & bookshelf speakers weighing up to 11lbs. Compatible with brands such as Klipsch, Sony, Yamaha, Harmon Kardon, Edifier, Polk, Samsung, Bose, Vizio, JBL, PA DJ and other speakers.
  • 【HIDE WIRES FOR A NEAT APPEARANCE】 The PSSS2 smart speaker stands come with a large hole (1.18"H x 0.59W) to manage your cables for a clean and tidy appearance. This is especially helpful if you're using speaker stands for surround speakers in a home theater system and want to keep things looking as tidy as possible.
  • 【QUICK & EASILY INSTALLATION】 You can easily pan the top plate 180 degrees from 5.9 to 10.82 inches to fit your various speakers of different sizes. We include the standard mounting hardware kit in the package, so you can quickly complete the installation of speaker stands in a few steps.
  • 【HEAVY DUTY & STURDINESS】 This surround sound speaker stand is equipped with non-slip pads that allow you to use it safely and securely on different types of floors. The recast pole and solid base provide double protection for your speakers, so your speakers will be safe.

#09 – Perlegear Universal Speaker Stand- Bookshelf Speaker Stands Holds 22lbs Speaker

Perlegear Universal Speaker Stand- Bookshelf Speaker Stands Holds 22lbs Speaker Stand Pair with Cable Management Surround Sound Speaker Stand- PGSS6
  • Wide Compatibility-This bookshelf speaker stand will work with whatever you got. It features a 7.79*7.79inch flat top plate with 22lbs/10kg weight capacity which is able to accommodate most speakers on the market regardless its shape or brand. Plus, the height of this speaker stand is 27.5 inches, which is a comfortable height when you are sitting on the sofa
  • Versatile-Perlegear bookshelf speaker stand is a good fit for most speakers. Above all, it can function as a multi-media speaker stand to work with your TV, gaming system, computer and more. Besides, this speaker stand is perfect as a musical instruments speaker stand in music studio. Just beyond expectation
  • Maximum Stability-11.8inch square wide base itself offers this bookshelf speaker stand a stable and steady support to the speaker. Four rubber pads are included and can be placed on the top plate, not only for anti-skid use, but also to absorb the shock of speaker and abate vibration so as to acquire good quality sound and achieve stability of the bookshelf speaker stand
  • Delicate Design-The speaker stands came with two types of base feet. The protective rubber feet are made for marble or wooden floor while the metal feet will keep the speaker stands stay still on carpet. This speaker stand pair feature a delicate and elegant design which will goes well with any home style
  • Buy with Confidence-Getting the bookshelf speaker stand will free you from complicated installation and only takes you minutes to get it installed. All necessary hardware and tools are included. Moreover, this speaker stands came with cable management capabilities for wire organization as well

#10 – Pyle Universal Speaker Stand Mount Holder Heavy Duty Tripod

Pyle Universal Speaker Stand Mount Holder Heavy Duty Tripod w/ Adjustable Height from 40” to 71” and 35mm Compatible Insert Easy Mobility Safety Pin and Knob Tension Locking for Stability PSTND2
  • Easy Height Adjustment: It features a telescoping center column that is adjustable ranging from 40’’ to 71’’ inch high secured it with the sturdy pin and screw locks; The rugged and durable metal construction tubing for safe and long term use
  • Tripod Leg Design: Center brace connects tripod legs for increased stability; The tripod speaker stands collapse easily to fit inside the bag for easy transportation It can hold speakers of up to 132 pound firmly and steadily for better sound effect
  • 35 millimeter Compatible Insert: The 6' ft speaker stand holder mount works with all speakers with 35 millimeter compatible insert; An ideal heavy duty audio stand for loud music, pa speakers, studio monitor and more
  • Tension Locking Mechanism: Built with knob style tension locking mechanism that hold the maximum weight of a speaker attached to the stand; It also supports the height of the speaker stand and prevent it from collapsing
  • Non Slip Feet: Pyle features Universal floor standing speaker stand as well as non slip rubber feet; The equal length distribution makes the base extremely stable and safe perfect for on stage or in studio use

Related Tags:

Leave a Comment