10 Seismic Speaker Cabinets Review 2022 – Buyer’s Guide

Seismic Speaker Cabinets Review 2022 – Despite the fact that manufacturers typically make guitar cabinets to go with a certain amp head they’ve designed, the ability to mix and match is always there and even part of the fun.


Seismic-Speaker-Cabinets

Seismic Speaker Cabinets Review 2022


#01 – Seismic Audio – OutRage10-10 Inch 800 Watt Car Audio Subwoofer Box Enclosure

Seismic Audio - OutRage12-12 Inch 1200 Watt Car Audio Subwoofer Box Enclosure with Rear Vent
  • Model: OutRage12 | 12 Inch 1200 Watt Car Audio Subwoofer Box
  • Rear Vented Design for Maximum Bass Output | Power Rating: 1200 Watts Max Power
  • High Powered 12 inch Woofer with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish
  • Voice Coil: 2.5 inch 4 Layer Dual Voice Coil | Impedance: 2 Ohms | Magnet: 2 x 50 Ounce
  • Sensitivity: 91 dB | Frequency Response: 25-150Hz | Binding Post Connectors | Dimensions: 17.7" x 14.9" x 13.8" | Weight: 35.3 lbs

#02 – Seismic Audio Speakers Pair of Active 12 Inch PA Speaker System,

Sale
Seismic Audio Speakers Pair of Active 12 Inch PA Speaker System, Tailgate Karaoke Speaker, Bluetooth Compatible
  • Portable Speaker System: This is the complete portable, party, or karaoke PA System from Seismic Audio Speakers. This package has everything you need for a professional PA setup to get the party started and keep it going.
  • Tailgate Karaoke Speaker System: This package includes a pair of speakers, speaker stands, a wireless microphone, a 20’ Speakon speaker cable, a power cord and a bluetooth remote control.
  • 12 Inch Speaker System: In this package you get two 12" PA/DJ speakers, one active and one passive. The active speaker has a built in amplifier to power the passive.
  • Bluetooth Karaoke Speaker System: Combined, these speakers put out an amazing 1600 watts of power. This package is truly all-in-one and has everything you need.
  • Perfect Party Package: This speaker system is ideal for parties, karaoke performances, church, or any other public gathering.

#03 – Seismic Audio – SA-MA4C – 4 Channel 200 Watt Powered PA Head Mixer with Bluetooth and Effects

Seismic Audio - SA-MA4C - 4 Channel 200 Watt Powered PA Head Mixer with Bluetooth and Effects
  • Model: SA-MA4C | 4 Channel Powered PA Head Mixer with Bluetooth
  • Power Rating: 100 Watts RMS at 8 ohm | 200 Watts RMS at 4 ohm | Built-In Bluetooth | USD | SD | Reverb
  • Controls: Volume, Bass, Treble & Effects on each Channel | Master Volume Controls | 3 Band EQ for Master Channel | CD/TAPE Volume Control
  • Inputs: 4 -1/4 Inch TRS | 4 XLR | RCA L/R Input | Outputs: RCA L/R Output | 4 Ohm Dual 1/4 Inch Speaker Outputs
  • Class AB Amplifier with Built-In Cooling Fan | Dimensions: 20.66" x 10.75" x 7" | Weight: 15.43 lbs

#04 – Seismic Audio – 310 Bass Guitar Speaker Cabinet PA DJ 750 Watts

Seismic Audio - 310 Bass Guitar Speaker Cabinet PA DJ 750 Watts 3x10 3 10
  • Recessed handles;   Full metal grill;   Terminal cup with two 1/4" jack inputs;   Ported
  • Woofer -three 10" each has a 50 Ouncemagnet with a 2" kapton voice coil;   Wired at 4 ohms
  • 750 watts rms -1500 watts peak.  40hz –16khz.  Sensitivity: 103 db.
  • 5/8 plywood front panel.  100 watt rms tweeter.  Black carpet with black metal corners

#05 – Seismic Audio SACB-8x4x100 8-Channel XLR Low Profile Circuit Board Snake Cable,

Seismic Audio Speakers 8 Channel Low Profile XLR Send Sub Snake Cable, XLR Splitter Cable, 100 Feet 
  • Low Profile Sub Snake Cable: Whether you have a permanent installation or mobile, this snake cable is rugged enough to handle whatever you throw at it. With circuit board technology you are ensuring a solid connection with your connectors. 
  • Sub Snake Cable: The quality of your sound can only be as good as the connections between the stage & the mixer. With this snake cable, each pair of heavy duty conductors is individually shielded, yielding clear sound while rejecting extraneous noise. 
  • XLR Splitter Cable: XLR connectors on the returns make this snake cable fit right in with professional power amps and mixing consoles without the need for converters or couplers. The cable is 100 feet long & has 25 gauge heavy duty conductors.
  • 8 Channel Splitter: Connect 8 different channels to the stage box. The box connectors are XLR female and the fantail connectors are XLR male. The stage box from Seismic Audio Speakers is numerically labeled and has circuit board technology.
  • 100 Foot XLR Cable: Awesome quality snake cables are very hard to find, especially at a decent price. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash, sound great.

#06 – Seismic Audio – Pair of Jack Plates with Dual Speakon and Dual 1/4″ PA/DJ Speaker Cabinet

Seismic Audio - Pair of Jack Plates with Dual Speakon and Dual 1/4" PA/DJ Speaker Cabinet
  • Metal Jack Plate - Sold in Sets of 2
  • 4.5" x 6.25"  Black in color
  • Has two 1/4" connectors
  • Also has two speakon inputs
  • These plates are brand new.  One year warranty

#07 – Seismic Audio Speakers Single Wedge Style Floor Monitor,

Sale
Seismic Audio Speakers Single Wedge Style Floor Monitor, Stage Monitor Speaker, PA/DJ
  • Floor Monitor: It’s important that you can hear your music on stage. These 10 inch monitors deliver every sound clearly with a Pro Audio 10 inch speaker.
  • Wedge Style Monitor Speaker: The floor monitor delivers sound through a 4” x 8” piezo horn tweeter with a frequency response of 45Hz to 20,000 Hz.
  • Floor Monitor Speakers: The wedge style monitor speaker has 100 watts RMS with 200 watts peak power.
  • Stage Monitor: The floor monitor speaker is a 2 way speaker with 40 oz magnet and a 2 inch voice coil. It is wired at 8 ohms and the stage monitor has dual ports.
  • Wedge Style Floor Speaker: The wedge style floor speakers weigh 22 lbs and have 18 gauge full face steel grill.

#08 – Seismic Audio – SA-MA8C – 8 Channel 400 Watt Powered PA Head Mixer

Seismic Audio - SA-MA8C - 8 Channel 400 Watt Powered PA Head Mixer with Bluetooth and Effects
  • Model: SA-MA8C | 8 Channel Powered PA Head Mixer with Bluetooth
  • Power Rating: 200 Watts RMS at 8 ohm | 400 Watts RMS at 4 ohm | Built-In Bluetooth | USD | SD | Reverb
  • Controls: Volume, Bass, Treble & Effects on each Channel | Master Volume Controls | 5 Band EQ for Master Channel | CD/TAPE Volume Control
  • Inputs: 8 -1/4 Inch TRS | 8 XLR | RCA L/R Input | Outputs: RCA L/R Output | 4 Ohm Dual 1/4 Inch Speaker Outputs
  • Class AB Amplifier with Built-In Cooling Fan | Dimensions: 20.66" x 10.75" x 10" | Weight: 18.8 lbs

#09 – Seismic Audio – XLR Low Profile Snake Cable with 4 TRS Returns – Circuit Board Snake for Recording,

#10 – Seismic Audio Speakers TRS ¼” Patch Cable, 25 Foot Balanced Cord,

Sale
Seismic Audio Speakers TRS ¼” Patch Cable, 25 Foot Balanced Cord, Black
  • TRS Cable: Seismic Audio Speakers’ TRS cables are TRS to TRS ¼” patch cables with a heavy duty flexible rubber jacket.
  • Patch Cable: These balanced ¼” cables are typically used to connect mixers to equalizers, crossovers, compressors, effects units or amplifiers.
  • Audio Cable: These shielded cables can be used anywhere a balanced ¼” connection is required. The wires are ¼” TRS male to ¼” TRS male.
  • 25 Foot Audio Cable: The audio cable is 25 feet long and is made of 22g Oxygen-Free Copper (OFC) conductors for an enhanced signal clarity and superior RF rejection.
  • Black TRS Cable: These 25 foot audio cables are black in color. You won’t have to compromise on audio quality with Seismic Audio Speakers’ TRS ¼” Patch Cables.

Related Tags:

Leave a Comment